The top is finished! All the welds have been ground off and the pin holes filled in. There will be some additional work to do on the bullet hole still. I will also wind up cutting part of the corner above the windshield on the driver side free and redoing it. But I want to move on to the rear apron first. I'm getting a little worn out on the top at this point.
Saturday, February 7, 2009
Final Grinding
The top is finished! All the welds have been ground off and the pin holes filled in. There will be some additional work to do on the bullet hole still. I will also wind up cutting part of the corner above the windshield on the driver side free and redoing it. But I want to move on to the rear apron first. I'm getting a little worn out on the top at this point.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment