The rear suspension is finally back together. I decided to go with 18 degrees of preload which will only drop the rear-end about 1 inch. I'm hoping the tires will fill the wheel wells but the ride will not suffer too much. Next up is to get the rotors drilled and the studs pressed in so I can mount the wheels.
Sunday, November 1, 2009
Rear Suspension
The rear suspension is finally back together. I decided to go with 18 degrees of preload which will only drop the rear-end about 1 inch. I'm hoping the tires will fill the wheel wells but the ride will not suffer too much. Next up is to get the rotors drilled and the studs pressed in so I can mount the wheels.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment