Assembly

I have again spent several days working on the car without posting anything. I have the front fenders bolted on with the fender beading. The cover plates are undercoated and screwed in and the hood latch and badges have been bead blasted and installed. However I don't have a hood release that is long enough so I will need to get a new one of those before I put the latch pin in the hood.

I have also all but finished the wiring under the hood. At this point the brake lights and turn signals do not work for some reason. I'm hoping it has to do with the fact that there are no bulbs or that the converter is not grounded, but I need to spend some time figuring that out. I also realized I wired the front turn signals into the output side of the converter rather than the input side. That means if you step on the brakes, the front blinkers come on as well as the back... Oops.