I have spent some time here and there over the past week getting my MegaJolt/E system ready to go. First I installed a serial to Bluetooth converter so I can use the Android application that is currently being written by a group of students at Eastern Washington University. I'm so excited, this app is starting to really take shape.
Second, I built the wiring harness that will connect the MegaJolt/E to the EDIS, coil pack and the crank position sensor. Right now the wires that disappear off the bottom of the image are simply log bare wires that will be hooked up when it goes in the car. This whole thing will be mounted under the package tray in the rear of the car.
Second, I built the wiring harness that will connect the MegaJolt/E to the EDIS, coil pack and the crank position sensor. Right now the wires that disappear off the bottom of the image are simply log bare wires that will be hooked up when it goes in the car. This whole thing will be mounted under the package tray in the rear of the car.
No comments:
Post a Comment